What are the safety tips for the Small vibratory bowl feeder?

The Small vibratory bowl feeder adopts the inflow type, no need to use a bucket to dig materials, and there is little extrusion and collision between materials. This machine is designed to ensure that the material is less scattered during feeding and unloading, which reduces mechanical wear.

• How does the safe start of the Small vibratory bowl feeder work?

• What are the safety tips for the Small vibratory bowl feeder?

• How to deal with frequent power outages of Small vibratory bowl feeder?

How does the safe start of the Small vibratory bowl feeder work?

(1) After inspection, the machine and transmission parts are in normal condition before starting;

(2) The machine is only allowed to start without load;

(3) After starting, if any abnormal phenomenon is found, it should stop immediately, and restart after the abnormal situation has been identified and eliminated.

What are the safety tips for the Small vibratory bowl feeder?

1. Small vibratory bowl feeder is strictly prohibited from overloading.

2. After the cage is lifted, no one is allowed to stand under the cage, and it is not allowed to ride on and off the cage. After loading, the loading personnel should stay away from the material hoist, and other types of personnel should not probe from the shaft. ,

3. When unloading, the operator must wait for the Small vibratory bowl feeder to stop stably before the operator can open the protective door and unload the cage. After unloading, the operator closes the protective door, and the winch operator can lower the cage.

4. There is a unified command signal for the lifting and lowering of the cage, which is arranged by the construction site and communicated to the operators (manipulator, commander, and operator). If the signal is unclear, the operator can refuse the operation.

How to deal with frequent power outages of Small vibratory bowl feeder?

In the actual production process, due to improper operation, the Small vibratory bowl feeder is prone to frequent power outages:

First, the Small vibratory bowl feeder is frequently started and stopped. When the equipment is continuously started, the starting current is large, causing the Small vibratory bowl feeder to trip;

The second is that there is too much material in the tank of the Small vibratory bowl feeder, resulting in a large start-up load of the Small vibratory bowl feeder, which can easily cause the vibratory feeder to trip;

Third, in the production process, due to the high moisture content of the material in the warehouse, the warehouse will often be full. When using the air cannon to treat the full warehouse, it is easy to operate improperly, resulting in a large impact of the materials in the warehouse on the Small vibratory bowl feeder, resulting in Small vibratory bowl feeder Feeder jumps.

Solution: First, strengthen the skills and knowledge training of post personnel, correctly use the air cannon to deal with the full warehouse, and strictly prohibit frequent starting and stopping of equipment; second, clean up the accumulated material in the hopper of the Small vibratory bowl feeder in time to prevent overloaded starting.

SuZhou WeiZheng Automation Equipment Co., Ltd. maintains close relationships with customers in Small vibratory bowl feeder industry, and is committed to strengthening production and operation, improving quality and safety.